Connecting to a power source – Samsung EC-NV40ZSBA-US User Manual

Page 15

Advertising
background image

<<  >>

Connecting to a Power Source

How to charge the rechargeable battery (SLB-37D)

Charging LED

■ Charging LED of the AC Adapter

Charging LED

Being Charged

Red LED is on

Charging is complete

Green LED is on

Charging error

Red LED is off or blinking

Being discharged

(Using the AC adapter)

Orange coloured LED is on

● Before inserting any cables or AC adapter, check the directions and

do not insert by force. It may cause damage to the cable or camera.

● If the charging LED of the AC Charger does not turn on or blink after

inserting the rechargeable battery, please check whether the battery
is inserted correctly.

● If you charge the battery with the camera power on, the battery can’t

charge fully. Turn the camera off while charging the battery.

● If you insert the fully discharged battery to charge it, do not turn on

the camera at the same time. The camera may not be turned on
because of the low battery capacity. Charge the battery for more than
0 minutes before using the camera.

● Do not use the flash frequently or take a movie clip with a fully

discharged battery that has only been charged for a short time.

Advertising
This manual is related to the following products: