Samsung EC-NV40ZSBA-US - Manual (Page 79)

<< 78 >>
Before contacting a service centre
The flash does not fire
• Flash off mode has been selected
 Dis-engage flash off mode.
• The camera mode can’t use flash
 Refer to the FLASH instruction. (p.32 ~ 33)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted the
default setting
 Reset the date and time correctly.
The camera buttons do not operate
• Camera malfunction
 Remove/re-insert battery and switch the camera on.
A card error has occurred while the memory card is in the camera
• Incorrect memory card format
 Re-format the memory card.
The images don’t play back
• Incorrect file name (Violation of DCF format)
 Do not change the image file name.
Colour of image is different to the original scene
• White balance or effect setting is incorrect
 Select appropriate White balance and effect.
Camera does not take images when pressing the Shutter button
• There is insufficient memory capacity
 Delete unnecessary image files.
•
The memory card has not been formatted
 Format the memory card. (p.71)
•
The memory card is exhausted
 Insert a new memory card.
•
The memory card is locked
 Refer to [Card Locked!] error message. (p.76)
•
The camera’s power is off
 Turn the camera power on.
•
The battery is exhausted
 Insert a fully charged battery. (p.15)
•
Battery is inserted incorrectly with the polarities reversed.
 Insert the battery according to the polarity marks (+, -).
The camera suddenly stops working while in use
• The camera stopped due to a malfunction
 Remove/re-insert battery and switch the camera on.
The images are unclear
• A picture was taken of the subject without setting an appropriate macro mode
 Select an appropriate macro mode to take a clear image.
•
Taking a picture beyond the flash range
 Take a picture within the flash range.
•
The lens is smudged or dirty
 Clean the lens.