Samsung EC-NV40ZSBA-US - Manual (Page 41)

Motion Icon & Self-timer lamp
Pressing the shutter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject’s movement Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds
In the following cases, the Motion Timer may not operate.
● The focus distance is over 3m.
● The exposure is too bright or dark.
● In backlight conditions.
● The movement is insignificant.
● The movement is detected beyond the
center part (50%) of the sensor where the
movement is recognized.
● If the camera doesn’t sense any movement
for 30 seconds, or the camera doesn’t sense
stillness after sensing movement.
<< 40 >>
Self-timer / Remote control
■ Motion Timer
■ The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer  Pressing the Shutter button  Confirming the
composition (Within 6 sec.) *1  Starting the detection (Swing your hands
fully) *2  Stopping the detection (Do not move)  Taking an image (after 2
sec.)
*1 : The camera detects the subject’s movement 6 seconds after pressing the
Shutter button, so confirm the composition within 6 seconds.
*2 : Move your body or hands fully.
[The detection range of
Motion Timer]