Samsung EC-NV40ZSBA-US - Manual (Page 29)

<< 28 >>
Using the camera buttons to set the camera
● If you operate OIS function using a tripod, the image can be blurred
by the vibration of the sensor of the OIS. Turn off the OIS function
when you use a tripod.
● If the camera is receives an impact the LCD monitor can be affected.
To make the camera function properly again, turn it on and off.
● Operate the OIS function when the battery is efficiently charged
( , ).
● If the low battery level ( ) is showing, OIS can still be set but will
not work.
● The OIS feature is not recommended in Macro mode.
● If the OIS function is set when recording video, the sound of the OIS
working may be recorded.
If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
This camera has a 3X optical zoom and a 5X
digital zoom function.
Using both will offer a total zoom ratio of 15X.
■ TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button will zoom into the subject
i.e. the subject will appear nearer.
Digital zoom TELE : When the maximum (3X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
[WIDE zoom] [TELE zoom] [Digital zoom 5X]
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
ZOOM W / T button