Samsung EC-NV40ZSBA-US - Manual (Page 77)

<< 76 >>
Important notes Warning indicator
● Camera Maintenance.
- Use a soft brush (available from photo stores) to gently clean the lens
and LCD assemblies. If this does not work, lens-cleaning paper with lens
cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come
into contact with solvent materials such as benzol, insecticide, thinners
etc. This may damage the body shell of the camera and also affect its
performance. Rough handling can damage the LCD monitor. Take care to
avoid damage and keep the camera in a protective carrying case when not
in use.
● Do not attempt to disassemble or modify the camera.
● Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
● When images are uploaded or downloaded, the data transfer may be
aff ected by static electricity. In this case, disconnect and re-connect the
USB cable before trying the transfer again.
● Always check the condition of the camera before an important event or
going on a trip.
- Take a picture to check that the camera is working correctly and ensure you
have a fully charged spare battery.
- Samsung cannot be held responsible for camera malfunctions.
There are several warnings that may appear on the LCD display
[Memory Error!]
• Memory card error
 Turn off the camera power and turn it on again.
 Insert the memory card again.
 Insert and format the memory card. (p.71)
[Card Locked!]
• The memory card is locked
 SD/SDHC memory card : Slide the write protect switch towards the top of
the memory card.
[No Card!]
• A memory card is not inserted
 Turn off the camera power and insert the memory card again.
 Turn off the camera power and turn it on again.
[No Image!]
• There are no images stored on the memory
 Take images.
 Insert a memory card that is holding some images.
[File Error!]
• File error
 Delete the erroneous files.
•
Memory card error
 Contact a camera service centre.