Samsung HT-H7730WM-ZA - Manual (Page 16)

16
- English
Settings
Resolution
Lets you set the output resolution of the HDMI
video signal to Bd Wise, Auto, 1080p, 1080i,
720p, 480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher quality.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto
lets the product adjust its HDMI output to 24
frames per second automatically for improved
picture quality if attached to a 24Fs compatible
TV.
~ You can enjoy the Movie Frame (24Fs)
feature only on a TV supporting this frame
rate.
~ Movie Frame is only available when the
product is in the HDMI 1080p output
resolution modes.
dvd 24Fs Conversion
Converts DVD playback to 24 frames per
second and outputs it via HDMI. This option is
only available when Movie Frame (24Fs) is set
to on.
Fit Screen Size
Lets you select the optimal size for the Smart
Hub or Screen Mirroring screen.
HdMI Color Format
Lets you set the color space format for the
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HdMI deep Color
Lets you set the product to output video
from the HDMI OUT jack with Deep Color.
Deep Color provides more accurate color
reproduction with greater color depth.
progressive Mode
Lets you improve picture quality when viewing
DVDs.
Sound
Speaker Settings
 Sound Output : Lets you select which speakers
are active, either the TV's speakers or the home
theater's speakers.
 Settings (Home Theater Speakers) : Lets you
adjust the following speaker settings and
turn the test tone on and off so you can test
the speakers.
- volume Level : Lets you adjust the relative
loudness of each speaker from 6dB to -6dB. For
example, if you like deep bass, you can increase
the loudness of the subwoofer by 6dB.
- distance : Lets you adjust the relative
distance of each speaker from the listening
position up to 30 feet. The farther the
distance, the louder the speaker will be.
- Speaker Test : Begins a test to set the best
surround sound configuration. Press Stop
Test to stop the test while it is in progress.
 Settings (Multiroom Link) : You can enjoy
sound through a remote speaker that is
connected to the home theater through your
home network. To use the network speaker,
select Multiroom. If there is a network
speaker available, it will appear on the screen.
- don't Use : The network speaker is not used.
- Multiroom : The network speaker outputs
audio. All network speakers output the
same audio regardless of channel using the
PCM format only.
✎ SOUNd EFFECT and 3d SOUNd are not
applied if Multiroom is set to on.
✎ The network speaker is not available when
Screen Mirroring is active.
✎ For further details, refer to the Multiroom
Link manual from the web site.
www.samsung.com > Support > Search for the
product name > Multiroom Link > Download PDF
Sound Customizer
Sound Customizer lets you calibrate the home
theater for the optimal sound quality based on
your hearing level and the ambient conditions.
To create a Custom Sound Profile, follow these
steps:
1. In the Sound Customizer Menu, select Add
Custom Sound.
2. On the next screen, select Start. The
preview screen appears.
3. Select preview to preview the Test Sound.
Select Next, and then press Ok to continue.