Samsung HT-H7730WM-ZA - Manual (Page 23)

23
- English
Settings
3. Press the WpS(pBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network after the
network connection is verified.
4. When it is done, highlight Ok, and then
press the Ok button.
✎ For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The Wi-Fi direct function allows you to connect
Wi-Fi direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎ Some Wi-Fi direct devices may not support
the AllShare function if connected via Wi-Fi
direct. If this is the case, change the network
connection method you used to connect the
device to the home theater.
✎ Wi-Fi direct transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi direct function on
any device in which it is currently on.
1. Turn on the Wi-Fi direct device and activate
its Wi-Fi direct function.
2. In the Home screen, select Settings, and then
press the Ok button.
3. Select Network, and then press the Ok
button.
4. Select Wi-Fi direct, and then press the Ok
button.
The Wi-Fi direct devices that you can connect
the home theater to appear.
Refresh
Wi-Fi direct
device Name : [HTS]H7730WM
Select your Wi-Fi direct device to connect to.
Androidxxxxxxx disconnected
Close
Settings
5. You have three ways to complete the Wi-Fi
connection:
~ Through the Wi-Fi device.
~ Through the product using PBC.
~ Through the product using a PIN.
Each is covered below.
Through the Wi-Fi device
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
direct device. See the device's user manual
for instructions.
2. When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
direct has requested to connect. Select Ok,
and then press the Ok button to accept.
3. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
direct screen as connected.
~ The PBC and PIN procedures connect devices
automatically.
Through the product Using pBC
1. Select the Wi-Fi direct device you want to
connect to this product, and then press the
Ok button.
2. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
direct screen as connected.
Through the product Using a pIN
1. Select the Wi-Fi direct device you want to
connect to this product, and then press the
Ok button.
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
direct device you want to connect.
4. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
direct screen as connected.