ATEN CN-6000 - Manual (Page 34)

Operation
Once the Switch to the CN-6000 has been accomplished, the remote system’s
video output is captured and displayed on your monitor. At the same time, your
local keystroke and mouse input is captured and sent to the remote system.
OSD Control Panel
A small OSD control panel showing the remote unit’s video resolution and the
CN-6000’s IP address opens at the lower right hand corner of the screen. The OSD
provides four icons that perform the functions described in the table below.
Icon Function
Hand Lets you move the OSD display to another position on the
screen.
Keyboard Various configuration actions related to the keyboard, video,
and mouse can be performed via hotkey combinations. This
function lets you configure the hotkey operation keys (see p.
28 for details).
Hammer Brings up the video adjustment utility.
Arrow Exits the Windows Client control of the remote unit.
Note: For computers running NT or Win 2000, the keyboard LED status also
displays. (For computers running Win 98 or Win ME, the LEDs on your
local keyboard reflect the status of the remote system.)
2003-11-14
CN-6000 User Manual
26