ATEN CN-6000 - Manual (Page 38)

Video Adjustment
You can adjust the placement and the picture quality of the remote screen (as
displayed on your local monitor) with the Video Options function. To do so, click
on the Hammer icon on the OSD Control Pane. The following screen appears:
An explanation of the settings is given in the following table:
Screen Position Adjust the horizontal and vertical position of the remote display
by Clicking the Arrow buttons.
Auto-Sync Click Auto-Sync to have the function detect the vertical and
horizontal offset values of the remote screen and automatically
synchronize it with the local screen. AutoSync also adjusts the
dimensions of the remote screen. Note that this function works
best with a bright screen.
If you are not satisfied with the results, use the Screen Position
arrows to position the remote display manually.
RGB Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component
of the image is correspondingly increased.
Video Quality Drag the slider bar to adjust the overall Video Quality. Values
can be from 20 to 100. The larger the value, the clearer the
picture and the more video data goes throught the network.
Depending on the network bandwidth, a high value may
adversely effect response time.
Bandwidth Control This setting adjusts the ratio between picture quality and network
speed. For slow data connections, drag the slider bar to a lower
setting to decrease the amount of video data transferred. This
ensures screen refresh at workable speeds.
2003-11-14
CN-6000 User Manual
30