ATEN CN-6000 - Manual (Page 52)

Rack Mounting
For convenience and flexibility, the CN-6000 can be mounted on a system rack.
To rack mount the unit do the following:
1. Screw the mounting bracket into the top or bottom of the unit as shown in
the example diagram below.
2. Screw the bracket into any convenient location on the rack.
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE PRICE
PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE
PRODUCT, DISK OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed, implied, or statutory
with respect to the contents or use of this documentation, and specially disclaims its quality,
performance, merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation
without obligation to notify any individual or entity of such revisions, or update. For further
inquires please contact your direct vendor.
2003-11-14
CN-6000 User Manual
44