Section 3: connecting your device, System requirements, Connecting to your device – Samsung SEC-LC11ZKAVZW User Manual
Page 15: System requirements connecting to your device
Connecting Your Device 11
Section 3: Connecting Your Device
With your new mobile hotspot and your computer, a wireless
Internet connection can always be at your fingertips.
System Requirements
•
WiFi 802.11b/g/n connectivity
If you choose to connect with a USB cable, your computer will
need the following minimum system requirements:
•
One Type-A USB Port
Note: Samsung 4G LTE Mobile Hotspot does not support USB cable
connections for use as a modem. The USB cable is for charging only.
Connecting to Your Device
Note: It is recommended the battery be fully charged in order to use your
device via Wi-Fi for the first time, or connect your device to the AC wall
charger for power.
The following should occur once you press the Power Key
(
):
•
Your device is powered as soon as you press the Power Key (
)
and the Power LED lights up solid green (if there is more than a 20%
charge.)
•
Once your device is powered and has been activated, it automatically
connects to the Internet provided that Mobile Broadband service is
available and one or more Wi-Fi devices are connected with your
device.
•
The 3G and/or 4G LTE Status LED indicator on the device lights solid
green (if there is more than a 20% charge) to indicate the device is in
service and ready to connect.