Samsung SEC-LC11ZKAVZW - Manual (Page 21)

Network 17
TCP/IP
The LC11 is shipped preconfigured to use private IP addresses on
the WAN side, and to act as a DHCP server. The router's default
WAN IP configuration is:
– WAN IP address: 192.168.1.1
– Subnet mask: 255.255.255.0
Note: These addresses are part of the IETF-designated private address range
for use in private networks, and should be suitable in most
applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in this menu.
– IP Address: This is the LAN WAN IP address of the router.
– IP Subnet Mask: This is the LAN WAN Subnet Mask of the LC11 router.
Combined with the IP address, the IP Subnet Mask allows a device to
know which other addresses are local to it, and which must be reached
through a gateway or router.
– MAC Address: Displays the device MAC address.
DHCP Server
A Dynamic Host Configuration Protocol (DHCP) server allows your
system to acquire network configuration settings from your ISP
automatically. Click or touch to enable.
• DHCP Address Range: The range of IP addresses reserved for use by
LC11’s DHCP server table. If a device with a static IP address wants to
connect to LC11’s network, the static IP should be outside of the DHCP
address range. Most devices do not have a static IP.
• Mask: The subnet mask network setting for LC11. The default value
255.255.255.0 is standard for small (class “C”) networks. If you
change the LAN IP Address, ensure you use the correct Subnet Mask
for the IP address range containing the LAN IP address.
• Gateway: Displays the default gateway address.
• DNS Server: Displays the primary DNS of the present connection.
Connected Devices
Displays connected devices. Up to 5 devices can be connected to
your network.
Buttons
• Apply: Click or touch button to update the profile and also make it the
current profile.
• Revert: Click or touch button to returns changed profile settings to the
previous settings.
• Refresh: Click or touch to refresh your device listing.