AMX Novara 1000 Series - Manual (Page 17)

NOVARA ControlPads
11 Novara ControlPads & KeyPads
RS232 Out Connector
FIG. 9 illustrates connecting a 1000 Series ControlPad to RS232-controlled devices:
IR Out Connector
FIG. 10 illustrates connecting the IR transmitter heads to a 1000 Series ControlPad for IR-controlled devices:
FIG. 9 RS232 Out Connector
RS232 Device
GND
Signal
SHARED 12V
NOVARA ControlPads support one-way RS-232 control (RS-232 TX signals to the
third-party device, not RS-232 RX signals from the controlled device).
If using the CC-NIRC IR emitter with 2-pin phoenix connector (not included), be
aware that the IR Emitter polarities on NOVARA ControlPads are opposite to that of
other AMX equipment. This is not an issue if using the included 10-pin connector.
FIG. 10 IR OUT Connector
IR Transmitter
GND
Signal
SHARED 12V
The IR Transmitter must be placed directly in front of the controlled device’s IR
window.