Downloading the program to the controlpad, Specifying button feedback, Adding feedback to a button script (example) – AMX Novara 1000 Series User Manual
Page 52
AMX NOVARA DCS1000 Device Configuration Software
46
Novara ControlPads & KeyPads
Downloading the Program to the ControlPad
1.
Connect the USB Programming Cable to a USB port on your PC, and to the Program (USB) port on the
ControlPad.
2.
Click on the Program menu bar item. This invokes the Download Program window (FIG. 18).
3.
Click the Program button to download the program to the ControlPad.
Specifying Button Feedback
A button LED has 3 possible states: On, Off and Flash. Use the Add Panel Feedback options to assign
feedback to a selected button.
Adding Feedback to a Button Script (Example)
1.
Select a button to configure from the System window (FIG. 19).
2.
Click on the Add Panel Feedback button in the Command Bar to invoke the Select Button Feedback
window (FIG. 20).
The selected button will be listed as the default although any button may be selected, via the drop-down
menu on the left side of the window.
FIG. 18
Download Program window
Buttons can be assigned to a group where only one LED of the group may be on at
any time.
FIG. 19
System window - Button 1 selected