ATEN Altusen KVM on the Net KN2108 - Manual (Page 56)

The Main Page lists all of the KN2018 / KN2116’s ports. You access the
computers connected to the its ports by selecting them on this page. The
meanings of the page headings are given in the table below:
Heading Explanation
Port No. This column lists the Port Numbers for all the CPU ports on the
installation. To access a particular computer use the Up and Down
Arrow keys to move the highlight bar to it, then press Enter, or Double
Click it.
After you select a port, the remote system’s video output is captured
and displayed on your monitor, and your local keystroke and mouse
input is captured and sent to the remote system.
Note: If you select a port that you do not have access rights to (see
Port Access, p. 27), you will switch to that port, but the screen will be
blank.
Port operation is discussed in detail on p. 45.
QV If a port has been selected for Quick View scanning (see p. 33), a
magnifying glass symbol displays in this column to indicate so.
PW The computers that are powered on and are On Line have a sun
symbol in this column to indicate so.
Name If a port has been given a name (see Edit p. 33), its name appears in
this column.
Note: If you return to the Main Page from one of the other pages
(Configuration, for example), and the Arrow keys don’t work for
moving the highlight bar, press the Tab key, to move through the
choices.
2005-08-24
KN2018 / KN2116 User Manual
44