ATEN Altusen KVM on the Net KN2108 - Manual (Page 57)

Port Operation
Select a port on the OSD Main Screen either by moving the highlight bar to it
with the Up and Down Arrow keys and pressing Enter, or by Double
Clicking it. Once you select a port, its screen displays on your monitor, and
your keyboard and mouse input affects the remote system.
The OSD Toolbar
The OSD provides a toolbar to help you control the KN2018 / KN2116 from
within the captured port. To bring up the toolbar, tap the OSD Hotkey (Scroll
Lock or Ctrl), twice. The toolbar appears at the upper left corner of the
screen:
Depending on the settings that were selected for Port Display Mode (see p.
60), the Port Number and/or the Port Name display at the right of the toolbar.
Note: When the toolbar displays, mouse input is confined to the toolbar area
and keyboard input has no effect. To carry out operations on the
computer connected to the port, you must recall the OSD and select
the port again.
Recalling the OSD
To dismiss the toolbar and bring back the OSD display (the Main,
Configuration, and Administration pages), tap the OSD Hotkey once. The
OSD Toolbar disappears, and the main OSD display reappears.
2005-08-24
Chapter 5. The Windows Client
45