ATEN Altusen KVM on the Net KN2108 - Manual (Page 61)

Windows Client Control Panel
The control panel consists of an icon bar at the top, with two text bars below
it. Initially, the text bars display the video resolution and IP address of the
device at the remote location. As the mouse pointer moves over the icons in
the icon bar, however, the text bar information changes to describe the icon’s
function. The functions that the icons perform are described in the table
below.
Icon Function
Drag the OSD display to another position on the screen by clicking
and holding on the hand while you move the mouse.
Click to bring up the Hotkey Setup dialog box (see p. 50 for details).
Click to bring up the Video Adjustment dialog box. Right click to do
a fast Auto Sync (see p. 52 for details).
Click to enable Panel Array Mode (see p. 55 for details).
Click to exit the Windows Client control of the remote unit.
(Space) Hover over the space to see the video resolution and IP address of
the device at the remote location.
These LEDs show the Num Lock, Caps Lock, and Scroll Lock
status of the remote computer. Click on the icon to toggle the
status.
Note: When you first connect, the LED display may not be
accurate. To be sure, click on the LEDs to set them.
The Hotkey Setup, Video Adjustment, and Panel Array functions are
discussed in the sections that follow.
2005-08-24
Chapter 5. The Windows Client
49