AGFA Scanner - Manual (Page 8)

Chapter 1 — Preparing the scanner 8
Relocking the scanner
If you need to transport the scanner over long distances, you should first relock it. This will protect
the scanner’s optical assembly from possible damage.
1. Place the scanner on a horizontal, flat surface and pull it forwards until you can see the locking
slider on the underside.
2. Turn on your scanner.
The scanner’s optical assembly moves to its home position.
3. When the info indicator (the left green one) stops blinking, slide the locking slider to the left.
Your scanner is locked.
4. Switch off your scanner.