Allied Telesis AT-GS950/48 - Manual (Page 253)

AT-GS950/48 Web Interface User Guide
253
Rate Control Settings
The Rate Control Settings page lets you set the Committed Information
Rate (CIR) for bandwidth restrictions. The CIR is the fixed bandwidth, in
bits per second, for arriving or departing traffic.
The CIR can be used when different virtual connections share the same
physical path, and certain connections require higher bandwidths than
others. For example, a connection with a high proportion of video signals
could be assigned a higher CIR than other connections requiring less
bandwidth.
You can create, modify, or delete a rate control entry by following the
procedures in the following sections:
 “Create a Rate Control Entry,” next
 “Modify the Committed Rate” on page 254
 “Delete a Rate Control Entry” on page 255
Create a Rate
Control Entry
To create a rate control entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Rate Control
Settings.
The Rate Control Settings page is displayed. See Figure 97.
Figure 97. Rate Control Settings Page
3. Enter a number in the Index field within the range of 1 - 65535 to
identify the rate control entry.
4. Enter a number in the Committed Rate field within the range of 1 -
15625 in 64 kbps to specify the bandwidth.