Allied Telesis AT-GS950/48 - Manual (Page 311)

AT-GS950/48 Web Interface User Guide
311
Modifying a
VLAN
To modify a VLAN ID, you must first delete it (by following the procedure
outlined in “Deleting a VLAN” on page 311) and then re-enter it by
following the procedure outlined in “Creating a VLAN” on page 310.
Deleting a VLAN To delete a VLAN ID, do the following:
1. From the main menu on the left side of the page, select DHCP
Snooping.
The DHCP Snooping folder expands.
2. From the DHCP Snooping folder, select VLAN Settings.
The VLAN Settings page is displayed. See Figure 122 on page 310.
3. To delete a VLAN ID, click the Delete button in the Action column of
the table.
The VLAN ID is removed from the table.
To delete multiple VLAN IDs, click the Delete All button.
All VLAN IDs are removed from the table.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.