Enable eee – Allied Telesis AT-GS950/48 User Manual
Page 358
Advertising
Chapter 28: Energy-Efficient Ethernet
358
Enable EEE
To enable EEE, perform the following procedure:
1. From the main menu on the left side of the page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select IEEE 802.3az EEE.
The IEEE 802.3az EEE page is displayed. See Figure 147.
Figure 147. IEEE 802.3az EEE Page
3. Select Enabled from the IEEE 802.3az EEE Status pull-down menu.
4. Click Apply.
5. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Advertising