No auth-mac enable, No auth-mac enable 8 – Allied Telesis AT-8100 Series User Manual
Page 1128
Advertising
Chapter 72: 802.1x Port-based Network Access Control Commands
1128
NO AUTH-MAC ENABLE
Syntax
no auth-mac enable
Parameters
None
Mode
Port Interface mode
Description
Use this command to deactivate MAC address-based authentication on
authenticator ports.
Confirmation Command
“SHOW DOT1X SUPPLICANT INTERFACE” on page 1138
Example
This example removes MAC address-based authentication from port
1.0.23:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23
awplus(config-if)# no auth-mac enable
Advertising