Allied Telesis AT-8100 Series - Manual (Page 1477)

AT-8100 Switch Command Line User’s Guide
1477
SHOW IP HTTPS
Syntax
show ip http
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the status of the HTTPS server and basic
information about the certificates on the switch. An example of the
information is shown here.
Figure 245. SHOW IP HTTPS Command
The fields are defined in Table 154.
HTTPS server enabled. Port: 443
Certificate 1 is active
Issued by: self-signed
Valid from: 5/17/2010 to 5/16/2011
Subject: C=US, ST=California, L=San_Jose, O=Jones_Industries, OU=Sales,
CN=167.214.121.45
Finger print: 3FB9D543 72D8E6F8 2159F35E B634A738
Table 154. SHOW IP HTTPS Command
Field Description
HTTPS server enabled Indicates that the HTTPS server is
activated on the switch. This line is not
displayed when the server is disabled.
Port The TCP port number of the server. This
parameter, which cannot be changed, is
not displayed when the server is disabled.