Allied Telesis AT-8100 Series - Manual (Page 647)

AT-8100 Switch Command Line User’s Guide
647
CLEAR IP DHCP SNOOPING STATISTICS
Syntax
clear dhcp snooping statistics interface port-list
Parameters
interface
Specifies a port list.
Mode
Privileged Executive mode
Description
Use this command to clear DHCP snooping statistics from the ports
specified.
For instructions about how to specify ports, see “Port Numbers in
Commands” on page 69.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 170
Example
This example clears the DHCP statistics from the ports 12 through 16:
awplus> enable
awplus# clear ip dhcp snooping statistics port1.0.12-
port1.0.16