Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT User Manual
Page 238
Advertising
AlliedView™-EMS 3.10 Device Management Guide
Page 238 of 367
Note
- Attempting to connect to an AT-8400 slave from an AT-9400 master will
result in the error message: "The error occurred with 'Set' operation. Error: gen
Error".
Note
- Attempting to connect to an AT-9424Ts or an AT-9424Ts/XP slave from any
master device that supports Enhanced Stacking will result in the error message: "The
error occurred with 'Set' operation. Error: gen Error".
Note
- Connecting to an AT-9408LC/SP or to an AT-9424T/SP slave from any
master device that supports Enhanced Stacking can only be done once. Once the
management session is returned to the master device, any attempt to reconnect to
these slave devices will fail.
AT-9400 Series
Advertising