Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 263)

AlliedView™-EMS 3.10 Device Management Guide Page 263 of 367
Event Log
Displays the RMON Event log.
Probe
Probe Config
Displays RMON probe information.
Note - The current firmware version returns 'noSuchName' for the Date and Time
parameter.
Network Interface Config
Displays configuration parameters for a particular network interface on this device.
Note - Valid MIB Set values for the Row Status parameter are 'active' and 'not in
service'. Attempting to set this parameter to any other value will result in error
message: "The error occurred with 'Set' operation. Error: bad value".
Port Menu
From the Port menu, you can view and edit MIB information about selected ports.
Utilization
Displays the port's utilization information.
Interface Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Note - The current firmware version returns '??? (117)' for the Port Type parameter.
Note - The current firmware version returns the value 0.0 for the Specific Media MIB
parameter which Device Manager interprets as a null value.
Error Statistics
Displays error statistics for the port.
Note - The current firmware version returns the value 0.0 for the Ethernet Chip Set
parameter which Device Manager interprets as a null value.
Detail Info
Port Info
Displays detailed port information such as port type, port link state and port speed
and duplex status.