Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 327)

AlliedView™-EMS 3.10 Device Management Guide Page 327 of 367
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The current firmware version does not allow the following parameters to be
configured:
• System Name
• System Location
• System Contact
Attempting to configure these parameters will result in the error message: "The
error occured with 'Set' operation. Error: time out occured."
Device Info
Displays device information such as the application version and hardware version.
IP Interface Info
Displays network-related information such as the addresses of the default gateway
and the agents.
Configuration File List
Displays a list of all configuration files available in non-volatile memory.
Telnet
Starts a Telnet connection to the residential gateway.
RTC Menu
From the RTC menu, you can view all information related to Network Time Protocol (NTP)
and Real Time Clock (RTC).
RTC Info
Displays RTC status information including current time, offset, last update, and last
delta.
NTP Server Info
Displays a list of all NTP servers available.
Port Menu
From the Port menu, you can view MIB information about the ethernet and voice ports.
Interface Info
Ethernet
Displays information for each ethernet port.