Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 93)

AlliedView™-EMS 3.10 Device Management Guide Page 93 of 367
Device Manager LEDs for AT-8401 Management Module
LED State Description
Gray supply (PWR B).
The switch is receiving power from the main power supply
(PWR A).
PWR Green
Gray (Only if
RPS is installed)
The switch is receiving power from the main power supply
(PWR A).
The main power supply is not functioning.
Note - Please refer to AT-8400 Line Cards for the operations and behavior of the line cards
installed on the chassis.
Note - The FAN A and FAN B LEDs are always green regardless of whether or not fan trays
are actually installed.
Note - The PWR LED is always green and the RPS LED is always gray regardless of whether
the switch is receiving power from the main power supply or the redundant power supply.
Note - Some parameters, when configured, may at times cause a temporary loss of
connection. When this happens, the following error message appears: "The error occurred
with 'Set' operation. Error: time out occurred.". This will not affect the application in any
way.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Network Info
Displays network-related information such as the addresses of the default gateway
and the agents.
Note - The current firmware version does not allow the DNS Server and Default
Domain Name parameters to be configured. Attempting to configure these
parameters will result in the error message: "The error occurred with 'Set'
operation. Error: gen Error.".
Chassis Info
Displays chassis information including the firmware information.