Allied Telesis AT-S70 - Manual (Page 189)

AT-S70 Management Software User’s Guide
189
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
Group Table.
The Configure SNMPv3 Group Table menu is displayed, as shown in
Figure 71 on page 187.
Note
To display a Group Name and its associated parameters from the
Configure SNMPv3 Group Table menu, type N to display the Next
Page and P to display the previous page.
4. To delete an entry from in the SNMPv3 Group Table, select Delete
SNMPv3 Table Entry.
The following prompt is displayed:
Enter User (Security) Name:
5. Enter a User Name.
The following prompt is displayed:
Enter Security Model [1-v1, 2-v2c, 3-v3]:
6. Enter the Security Model of this User Name.
Choose from the following:
1-v1
Select this value to associate the Group Name with the SNMPv1
protocol.
2-v2c
Select this value to associate the Group Name with the SNMPv2c
protocol.
3-v3
Select this value to associate the Group Name with the SNMPv3
protocol.
The following prompt is displayed:
Do you want to Delete this table entry? (Yes or No):