Allied Telesis AT-FS238b/2 - Manual (Page 18)

Overview
8
Table 1 lists the maximum operating distances for the bridging converters.
Table 1 Maximum Operating Distances
Model
100Base-FX 10Base-T/100Base-TX
Connector
Maximum Operating
Distance 1
1. Maximum distance for 100 Mbps optical datalinks is dependent on the following factors: type of optical fiber,
duplex mode of both end-nodes, and maximum optical loss budget for each of the optical fiber at the operating
optical wavelength.
Connector
Maximum Operating
Distance 2
2. Maximum distance can only be obtained when the UTP/STP cabling is installed and verified to TIA/EIA 568A
Commercial Building Telecommunications Cabling Standard.
AT-FS238a/1
AT-FS238b/1
Simplex
SC 15 km (9.3 mi) RJ-45 100 m (328 ft)
AT-FS238a/2
AT-FS238b/2
Simplex
SC 40 km (24.8 mi) RJ-45 100 m (328 ft)