Allied Telesis AT-FS238b/2 - Manual (Page 29)

19
Chapter 2
Installing the Bridging Converter
This chapter explains how to install the AT-FS238a/x and AT-FS238b/x Series
Bridging Converters. These bridging converters can be installed on a desktop
or in an AT-MCR12 chassis.
Verifying Package Contents
Make sure the following items are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales representative for
assistance.
❑
One AT-FS238a/x or AT-FS238b/x Series Bridging Converter
❑
Four protective feet (for desktop use only)
❑
AC/DC power supply (12VDC model only)
❑
DC power connector (12-50VDC model only)
❑
This installation guide
❑
Warranty card
Note
For information on the power supplies used with the AT-FS238a/x and
AT-FS238b/x Series Bridging Converters, refer to “External Power
Supply” on page 9.