Aiwa XR-DV700 - Manual (Page 15)

15
En
PLAYING DISCS—BASIC PLAYBACK
Basic playback operation common to DVDs, audio CDs, and
video CDs are described in this section.
Check your TV connection first
•Make sure the TV set is connected and its input source is
selected properly.
•Various guide displays of the current operation are available
on the TV screen. To view them, make sure you have “Guide
Message ON” in the Setup menu (see “Guide Message”,
page 32).
•You can select the language for the guide message out of 3
available languages (see “Menu Language”, page 32).
Playing discs
1 Press DVD/CD.
2 Press z OPEN/CLOSE to open the disc
compartment.
Place a disc with the label side up. Then close the disc
compartment.
z OPEN/CLOSE
3 Press c.
For a DVD, or a VCD with PBC, playback starts
automatically when the disc is loaded.
•Do not open or close the disc compartment forcibly by hand.
If "LID ERR" is displayed, unplug the AC power cord and
contact your AIWA dealer.
•Do not place more than one disc.
•Do not tilt the unit with a disc loaded.
•Do not touch the pickup lens. If it is soiled, discs may not
be played normally.
To remove the disc
Press z OPEN/CLOSE in stop mode to open the disc
compartment. Then pull out the disc while pressing the center
pivot.
To play DTS audio CDs
Hold down SURROUND to select "DTS MODE". "
CD
MODE" lights up. Otherwise, high-level noise will be
produced which may harm both your hearing and the unit.
If "PCM CD" and the elapsed playback time
indication appear alternately in the display
You are trying to play a regular (PCM) audio CD when the
unit is in the DTS mode. Hold down SURROUND to select
"PCM MODE"
.
Pivot