Aiwa XR-DV700 - Manual (Page 17)

17
En
Basic operations to locate a desired point are described here.
DVDs can also be searched by other methods (see "Playing
discs—DVD features", page 20).
Direct selection (CDs and VCDs only)
Select a track directly by entering the track number on the
remote control.
Press the numbered buttons for the desired track.
Example:
To play track 12, press +10, 2.
To play track 20, press +10, +10, 0.
Playback begins at the beginning of the selected track and
continutes to the end of the disc.
•For VCDs with PBC, turn off PBC first (see "Disabling PBC",
page 16).
PLAYING DISCS—SELECTING TRACKS/CHAPTERS
Fast forward/reverse playback
Hold down f or g during playback.
- DVDs: “fx 2” or “gx 2” is displayed on the TV
screen.
- CDs and VCDs: “fx 5” or “gx 5” is displayed on
the TV screen.
To change playback speed
Hold down f or g repeatedly.
- DVD: playback speed changes among double speed, 8 times
and 32 times.
- CDs and VCDs: playback speed alternates between 5 times
and 16 times.
To return to normal playback
Press c.
•There is no audio during fast playback (DVDs and VCDs).
•Fast playback speed is the value for a disc with an average
bit rate.
Skipping
Press f or g repeatedly during playback.
- With each press of g, the disc position skips to the
beginning of the succeeding tracks (CDs/VCDs) or chapters
(DVDs).
- With each press of f, the disc position skips back first
to the beginning of the current track, then to the previous
tracks (CDs/VCDs) or chapters (DVDs).
•Skipping may be disabled on some DVDs.