Aiwa XR-DV700 - Manual (Page 28)

28
En
TIMER
4 Press f or g to set the timer-on time, then
press ENTER or a.
5 Press f or g to set the timer-activated
duration, then press ENTER or a.
With each press, the timer-activated duration changes in
5-minute steps between 5 to 240 minutes.
If there is no button input for 4 seconds, the current setting
is entered automatically.
•VOLUME/MULTI JOG is also available in place of f
or g.
6 Adjust the volume and tone for timer playback.
If the volume level is set to 21 or higher, it is automatically
turned down to 20 when the unit is turned on by the timer.
7 Prepare the source.
To play the disc, insert a disc.
To play the radio, select the band and tune in the desired
station.
To play external equipment connected to the AUX jacks,
set an external timer for the equipment so that playback
begins at the same time.
8 Press POWER 6STANDBY/ON to turn the unit
off.
"5" remains on the display to indicate the timer standby
mode (when ECO mode is deactivated).
At timer-on time, the unit turns on and plays the selected
source. After the specified timer-activated duration, the
unit turns off again.
•Timer playback will not begin unless the unit is turned off
first.
•Connected equipment cannot be turned on or off by the built-
in timer of this unit. Use an external timer.
Sleep timer
Turns off the unit automatically after a specified time.
1 Press MODE repeatedly to display "SLEEP".
On the remote control, press SHIFT+SLEEP.
2 Press f or g repeatedly to set the sleep
timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
while "SLEEP" is displayed, the current setting is entered
automatically.
The unit turns off after the selected time.
•VOLUME/MULTI JOG is also available in place of f
or g.
To check the remaining time until the unit turns off
Press MODE repeatedly (press SHIFT+SLEEP on the remote
control). The remaining time is displayed for 7 seconds.
To cancel the sleep timer
Follow steps 1 and 2 above (press SHIFT+SLEEP twice on
the remote control) so that "SLEEPoFF" is displayed.
Timer playback
Turns on the unit at a specified time for the specified duration.
Make sure the clock is set correctly.
1 Select the desired playback source.
2 On the main unit
1 Press MODE repeatedly to display " ".
2 Within 7 seconds, turn VOLUME/MULTI JOG
to display " PLAY".
On the remote control
Press SHIFT+TIMER.
"5" indicator lights up and " PLAY" appears on the
display. The timer-on time and the source name along
with the timer-activated duration appear alternately on the
display.
3 Within 4 seconds, press ENTER (a on the remote
control).
The timer-on time and the source name along with the
timer-activated duration appear alternately on the display.