Preparation, Placement – Aiwa XR-DV700 User Manual

Page 5

Advertising
background image

5

En

PREPARATION

Placement

Place the speakers in their proper position. All speakers for a
full 5.1-channel home theater come supplied with your DVD
system.

L&R: Front speakers (marked "FRONT")
C: Center speaker (marked "CENTER")
Place it in the center of the two front speakers, possibly on or
below the TV set.
LS&RS:

Surround speakers (marked "REAR")

Place them directly to the side of or slightly behind the listening
area. Align them horizontally, preferably about 1 meter (3 feet)
above ear height.
SW: Subwoofer
Place it on the floor close to a wall or in a corner of the room.

To attach the front speaker to the pedestal

To mount the surround speakers on the wall
Mount each speaker on a spot that can hold its weight.

AIWA disclaims any responsibility for injury to persons
or other accidents caused by not fitting the surround
speakers properly or if the place of the installation is not
suitable.

•Either of the two front speakers can be used as the right or

the left one; likewise for the surround speakers.

•Do not place the left and right front speakers close to the TV

set, as doing so may cause picture noise.

•Sound output from the center and the surround speakers is

only available when the Dolby or the DTS surround system
is activated with the appropriate setting.

Placing the main unit
Allow 15 cm (6 in.) clearance from the top of the unit for
movement of the disc compartment lid.

Attaching the anti-skid patches
To prevent the surround and center speakers from slipping,
attach the supplied anti-skid patches to the bottom of the
speakers. Use 3 patches for each of these speakers.

Advertising