Chapter 5 advanced configuration – Acer AIR-204 User Manual
Page 37
User Guide for AIR-104/AIR-204 5-8
Step 3
To add an entry to the DHCP Static Assignment Table, click on the
Add button at the bottom of the table. The Add a Static Entry screen
appears in the main window of the ICC browser screen.
Step 4
Enter the following information to create a static DHCP entry:
Name: Enter a name for your reference.
IP Address: The IP address to be consistently assigned to this device.
MAC Address: The hardware address associated with the Ethernet adapter
of the network device. Please note that dashes must separate each pair of
hexadecimal digits.
Step 5
When you are finished, click on the Apply button. The DHCP Static Assign-
ment Table will appear again in the main window of the ICC browser screen.
Step 6
Repeat steps 3-5 to assign further static DHCP entries. You may also select
an existing static DHCP entry by clicking it with the mouse; then click on the
Edit button to edit the selected entry, or click on Delete to delete it.
Chapter 5 Advanced Configuration