Acer AIR-204 - Manual (Page 52)

7-11 User Guide for AIR-104/AIR-204
clear profile statistics isp2
Description: The statistics fields in the specified Internet profile are reset to their initial
values with this command. If no profile name is specified, the statistics of both profiles are
cleared.
connect profile isp1
connect profile isp2
Description: This command activates the profile as if a trigger occurred.
disconnect profile isp1
disconnect profile isp2
Description: For active Internet profiles, this command terminates the connection as if an
idle timeout occurred.
show profile
This command displays a summary of all configured Internet profiles.
Example:
Command> show profile
Prof Name Type AdminState Remote DN Call Action
------------------------------------------------------------------------------------------------------------
isp1 Modems Enabled 5559357 Dial only
isp2 Modems Enabled 5559357 Dial only
show profile isp1
show profile isp2
Description: The details of a configured Internet profile are displayed.
Example:
AcerRouter> show profile isp1
Profile type: Modems Admin. State: Enabled
Call Action: Dial only Remote DN: 5553500
Clid Auth: No Caller ID:
Call Back: No Call Back #:
PPP Oper. State: Down
Max Receive Unit : 1524
User Account Name : account1
Remote System Name:
Send Auth. Type: Either Recv Auth. Type: None
TCP/IP VJ Compression: Disabled Inactivity Timeout: 300
Multilink Type: Disabled
Chapter 7 Command Line Interface