AT&T E5934B - Manual (Page 22)

18
Telephone operation
18
Handset settings
Using the feature menu you can change settings to
customize how the telephone works.
Press
MENU
, then use the
V^
buttons to scroll to
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press
SELECT
to select the highlighted item.
Press
OFF
at any time to cancel an operation, back up
to the previous menu, or exit the menu display.
Ringer volume
Using this menu you can set a ring volume level (1-6), or
turn the ringer off (0). Use the
V^
buttons to hear
a sample of each volume level, then press SELECT to
select the one you prefer.
— OR —
When the handset is in idle mode, press VOLUME
^V
buttons on the right side of the handset to
change ringer volume directly.
NOTE: The ringer volume level also determines the levels of ringing for
intercom calls (see page 15) and the paging tone when initiating the
Handset Locator feature (see page 12). If the handset ringer volume level is
set to off (0), that handset is silenced for all calls and paging.
Ringer tone
This feature allows you to choose one of 10 ringing
tones. Use the
V^
buttons to hear a sample of each
ringer tone, then press
SELECT
to select the one you
prefer.
Key tone
The handset is factory programmed to beep at each key
press. Use the
V^
buttons to select
ON
or
OFF
, then
press
SELECT
to save your preference.
NOTE: If you select OFF, you will not hear the beep tone when you
press keys.
Highlighted
menu item
>DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON