Nikon D200 - Manual (Page 168)

158
Cu
stom S
ettings
S
etup
Custom Setting d1: Beep
Controls the pitch of the beep that sounds when the self-
timer is counting down or the camera focuses in single-
servo AF with Focus (the default setting) selected for Cus-
tom Setting a2 (AF-S Mode Priority). Choose from High
(the default option), Low, and Off .
A icon appears in the control panel when High or Low
is selected.
Custom Setting d2: Viewfi nder Grid Display
Select On to display on-demand grid lines in the view-
fi nder (
6). The default option is Off .
Custom Setting d3: Viewfi nder Warning Display
Select On (the default option) to display a warning in the
viewfi nder when the battery is low, no memory card is in-
serted, or when shooting in black-and-white. No warning
is displayed when Off is selected; before shooting, check
indicators in the control panel.
Custom Setting d4: CL-Mode Shooting Speed
This option determines the rate at which photographs
can be taken in C
L
(continuous low-speed) mode (during
interval timer photography, this setting also determines
the frame advance rate for single-frame and mirror-up
modes). Shooting speed can be set to values between
1 and 4 frames per second (fps); the default value is 3 fps.
The frame advance rate may drop at slow shutter speeds.
Custom Setting d5: Exposure Delay Mode
Select On to delay shutter release until about 0.4 s after
the shutter-release button is pressed, reducing camera
shake in situations in which the least camera movement
could result in blurred photographs (for example, micro-
scope photography). The default option is Off .