Custom setting e2: slowest speed when using flash, Custom setting e3: built-in flash mode – Nikon D200 User Manual

Page 171

Advertising
background image

161

S

etup

Cu
stom S

ettings

Custom Setting e2: Slowest Speed When Using Flash

This option determines the slowest shutter speed pos-
sible when using front- or rear-curtain sync or red-eye
reduction in programmed auto or aperture-priority auto
exposure mode (regardless of the setting chosen, shutter
speeds can be as slow as 30 s in shutter-priority auto and
manual exposure modes or when the fl ash is set to slow
sync, slow rear-curtain sync, or red-eye reduction with slow
sync). Options range from / s (1/60 s, the default setting)
to 30 s (30 s).

Custom Setting e3: Built-in Flash Mode

Choose the fl ash mode for the built-in fl ash.

TTL (default): Flash output is adjusted automatically in re-
sponse to shooting conditions.

Manual: The fl ash fi res at the level selected in the menu
shown at right. Highlight a setting between Full Power
and 1/128 Power (

1

/

128

of full power) and press the multi

selector right to return to the Custom Settings menu (at
full power, built-in Speedlight has a Guide Number of
13/42 [m/ft, ISO 100]).

icons blink in the control panel

and viewfi nder. No monitor prefl ash is emitted, allowing
the built-in fl ash to function as a master fl ash for optional
slave fl ash units when used with a remote Speedlight
commander such as the SU-4.

Advertising