Nikon D200 - Manual (Page 179)

169
S
etup
C
ustom S
ettings
Custom Setting f2: When Multi-Selector Is Pressed;
If desired, the multi selector can be used to activate the
exposure meters or initiate autofocus.
Option Description
Do Nothing
(default)
Multi selector does not activate exposure meters or initiate auto-
focus.
Reset Mtr-Off Delay Pressing multi selector activates exposure meters.
Initiate Autofocus
In AF-S or AF-C mode, pressing multi selector activates exposure
meters. Camera focuses while multi selector is pressed.
Custom Setting f3: Role of Multi-Selector in full-frame Playback
By default, pressing the multi selector up or down during
playback displays the other images on the memory card,
while pressing the multi selector left or right changes the
photo information displayed. These roles can be reversed
using Custom Setting f3.
Option Description
Info
▲▼/PB
(default)
Press multi selector up or down to change photo info displayed,
left or right to display additional images.
Info /PB
▲▼
Press multi selector up or down to display additional images, left or
right to change photo info displayed.
The multi selector can be used at any time when the monitor is on. The focus selector
lock switch only takes eff ect when the monitor is off .
Using the Multi Selector