Nikon S3500 User Manual
Page 144
Advertising
E
26
Refe
3
Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do
not use force when connecting or disconnecting the plugs.
4
The camera automatically turns on.
• When properly connected, the PictBridge startup screen
(
1) is displayed in the camera monitor, followed by the
Print selection screen (
2).
B
If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (
E83) in the
camera’s setup menu to Off, then connect the camera again.
Print selection
1
2
Advertising