Using the flash (flash modes), A53) f, A53) – Nikon S3500 User Manual

Page 71

Advertising
background image

53

Sh
oot

in

g

F

e

at

ures

Using the Flash (Flash Modes)

The flash mode can be set to match the shooting conditions.

1

Press the multi selector

H (m flash mode).

2

Press

H or I to choose the desired flash

mode and press the

k button.

See “Available Flash Modes” (A54) for more information.
If a setting is not applied by pressing the k button within

a few seconds, the selection will be canceled.

When U (Auto) is applied, D is only displayed for a

few seconds, regardless of Monitor settings (

A98).

B

Notes About the Flash Lamp

The flash lamp indicates flash status when the shutter-release

button is pressed halfway.

- On: The flash will fire when you press the shutter-release

button all the way down.

- Flashing: The flash is charging. Wait a few seconds and try

again.

- Off: The flash will not fire when an image is taken.

If the battery is low, the monitor turns off while the flash charges.

C

Effective Range of the Flash

When ISO sensitivity is set to Auto, the flash has a range of 0.5–4.1 m (1 ft 8 in.–13 ft) at the
maximum wide-angle zoom position and a range of 1.0–2.1 m (3 ft 4 in.–7 ft 1 in.) at the maximum
telephoto zoom position.

Auto

Advertising