Nikon S3500 - Manual (Page 197)

E 79
Refe
rence S
e
cti
o
n
Auto Off
When the camera is on and a period of time passes without any operations having been
performed, the monitor will be turned off and the camera will enter standby mode (
A25) to
save power. In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, or 30 min can be selected.
C
When the Monitor Turns off for the Power Saving Function
• Power-on lamp flashes in standby mode.
• Camera turns off after approximately three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
- Power switch, shutter-release button, A button, c button or b (e movie-record) button
C
Auto Off Settings
• The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
- When a menu is displayed: Three minutes minimum (or 5 min or 30 min, if these settings are
selected)
- During slide show playback: up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
- When an audio video cable is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
Press the d button M z menu icon M Auto off M k button