Nikon S3500 User Manual
Page 227
F
9
Tech
ni
cal
Not
e
s an
d
Index
Date and time of recording
are not correct.
• If the camera clock has not been set, “Date not
set” indicator flashes with shooting and movie
recording. Images and movies recorded before
clock is set are dated “00/00/0000 00:00” or “01/
01/2013 00:00” respectively. Set the correct time
and date from the Time zone and date option
in the setup menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepieces, and reset as required.
20,
22,
No indicators displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
98,
Print date not available.
The camera clock has not been set.
Date not appearing on
images even when Print
date is enabled.
• The current shooting mode is one that does not
support Print date.
• The date cannot be imprinted on movies.
98,
Screen for setting time zone
and date is displayed when
the camera is turned on.
Clock battery was exhausted; all settings were
restored to their default values.
The camera settings reset.
Monitor turns off, and the
power-on lamp flashes
rapidly.
Battery temperature is high. Turn off the camera
and allow battery to cool down before resuming
use. After the lamp flashes for three minutes, the
camera will turn off automatically. Pressing the
power switch also turns off the camera.
Problem
Cause/Solution
A