ROTHENBERGER ROWELD D 2/10 - Manual (Page 34)

32 ENGLISH
8 Technical data
Welding materials .......................... PP, PE, PVC, PVDF and other thermoplastics
Welding rate, approx. ..................... Ø 3 mm: 0,6 kg/h PP
Ø 3 mm: 0,6 kg/h PE
Welding rod ................................... Welding rod Ø 3 mm
Application range ........................... Wall thicknesses 1-10 mm and film/sheeting welds
Weight ........................................... 3,4 kg
Drive .............................................. 230 V (115V) AC speed controlled
Extruder heating system ................ 875 W (220 W)
Air preheater .................................. 2100 W (1600 W)
Air supply ....................................... Integrated air supply (Autoair)
Air rate ........................................... ------------
Protection class ............................. I
Protection type ............................... IP 20 according to DIN EN 60529
Control of melt temperature ........... Temperature controller with concurrent momentary value
and setpoint display
Control of air temperature .............. Temperature controller with concurrent momentary value
and setpoint display
Cold start protection ....................... Start temperature interlock and startup timer for melt and
preheat air
9 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EC on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.