3 installing the print ribbon cartridge, Installing the print ribbon cartridge – HID DTC4500e User Guide User Manual

Page 20

Advertising
background image

DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1

Page 20

April 2014

2.3

Installing the Print Ribbon Cartridge

FARGO Direct-to-Card Printers require highly specialized supplies to function properly.
The FARGO DTC4500e Card Printer uses a one piece, disposable ribbon cartridge system.
To maximize printer durability, reliability and printed card quality, you must use only FARGO-certified

supplies.
Your FARGO warranty is void, where not prohibited by law, if you use supplies other than FARGO-

certified supplies.
Printer cleaning is recommended with each ribbon change to ensure quality printed cards.
Resin-only print ribbons consist of a continuous roll of a single resin color. No protective overlay

panel (O) is provided because resin images do not require the protection of an overlay.
Step Procedure

1

Pull open noted drawer.

2

Insert the print ribbon cartridge into the printer.

3

Close the front cover.

Advertising