3 calibrate laminator (toolbox), Calibrate laminator (toolbox) – HID DTC4500e User Guide User Manual
Page 30
Advertising
DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 30
April 2014
4.3
Calibrate Laminator (Toolbox)
The Calibrate Laminator tab provides information about Laminator Sensor Calibration.
To calibrate the laminator:
Step Procedure
1
Laminate a sample to raise the temperature to the Transfer Temperature displayed on the
Lamination tab.
2
Remove the cartridges from the laminator and close the cover.
3
Click the
Calibrate button.
Advertising