HID DTC4500e User Guide - Manual (Page 67)

DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
April 2014 Page 67
4.12.3.1 Defined Area
To define multiple areas, increase the count in the Defined Area field and repeat the overlay or print
area definition steps.
4.12.3.2 For Print and Overlay
This option applies the defined area to both the print and overlay processes.
4.12.3.3 For Overlay Only
The defined are applies only to the overlay process. The entire card prints and only the overlay is
affected.
4.12.3.4 For Print Only (No Overlay)
The defined are applies only to the print process. Overlay is disabled.
4.12.4 Security Options
The Security Options area includes the following options.
4.12.4.1 Visual Security Solutions
Use this field to enable and select a visual security option. The drop down list is selectable only on
the Front side and is not an option for the back side of a card. The default value for all cards is No
Visual Security.
When one of the options is selected, the Overlay/Print Area feature is disabled and the security
options become selectable.
This field presents options based on the orientation of the card in the template.
Landscape designs offer:
A – Upper Left
B – Upper Right
C – Lower Left
D – Lower Right
Portrait designs offer:
E – Upper Left
F – Upper Right
G – Lower Left
H – Lower Right
4.12.4.2 Verimark
This option is reserved for future use.
4.12.4.3 HoloMark
Use this option for hologram security.