Replacing the inserts of the floor nozzle, Replacing the inserts of the hand nozzle, Operation – Karcher SGV 8-5 User Manual

Page 24: Display, Factory-set display language, Selecting the display language, Turning on the appliance, Cold water/suction operation, Applying cold water, Vacuuming operations

Advertising
background image

– 5

Illustration

Illustration

Always place the machine in a horizontal
position during operation.

Only SGV 8/5:

Text or a line/bar presentation is shown
on the display.

The line/bar presentation depicts a cer-
tain period of time. At the beginning of
the period of time 10 bars are shown,
which are replaced by lines from the
right to the left until 10 lines are shown
in the end.

EU/CH: German

GB: English

Users, whose national language is not
available as the display language:

Select English as the display language.

Available display languages:

German english

English

French

Spanish

Japanese

Set the rotary switch on the appliance to
"0/OFF".

Set the handwheel on the handle to
cold water.

Press the suction button and the steam
switch.

Set the rotary switch to cold water/suc-
tion operation.

The lower line is flashing as the display lan-
guage has not been saved yet.

Release the suction button and the
steam switch.

Select a language by means of the
handwheel.

Press the steam switch in order to save
the display language. The bottom line
stops flashing.

Notice
Risk of damage! Do not tilt the appliance
while it is switched on.

Plug in the mains plug.

Set the rotary switch to the desired op-
erating mode.

Note: With this operating mode the hand-
wheel has the "Apply cold water" function in
every position. The steam/hot water opera-
tion is deactivated.

Set the rotary switch to cold water/suc-
tion operation.

Press the steam switch. Cold water is
dispensed as long as the button is
pressed.

Start suction operation: Press suction
button briefly.

End suction operation: Press suction
button again briefly.

Press the steam switch and at the same
time press the suction button briefly.
Suction operation starts and cold water
is dispensed at the same time.

Replacing the inserts of the floor

nozzle

Replacing the inserts of the hand

nozzle

Operation

Display

Text

# # # # _ _ _ _ _ _

Factory-set display language

Selecting the display language

language

German

Turning on the Appliance

filling process

please wait

Cold water/suction operation

Applying cold water

cold water

Vacuuming operations

Combined operation

24

EN

Advertising
This manual is related to the following products: